|
|
|
|
 KS-75
Precision V-cuts in plastic or aluminium profiles for transoms and mullions; with corresponding accessories also suitable for aluminium.
- Easy and safe to operate
- Excellent cutting quality
- Variable to suit and section height
- No damae to end surfaces
- KS-75 V-cut saw with particularly sturdy design
The sturdy design of the V-cut saw KS-75 ensures very high cutting quality. The saw unit moves on precision-ground, twin-shaft guides firmly connected to the machine stand at both ends. The centrally arranged free cylinder ensures smooth and jolt-free movement, thus providing the prerequisite for cutting aluminium with the corresponding attachments. The KS-75 can also be effectively used a crosscut saw for 45° cuts in section heights up to 75 mm. Off-cuts and initial cuts can therefore be carried out in one single operation.
The design of the KS-75 also ensures of the surface of the sections is protected. The section ist pressed horizontally against the vertical stop table. As a result the section lies on ist webs ensuring the end surface cannot be damaged.
(Subject to modification!)
|
|
